How To Replace Interior Window Trim

Expert, step-by-step illustrated guide shows yous how to remove interior trim without damaging the trim or the wall.

If moldings and trim are badly damaged, it's best to replace them. This work isn't especially difficult, only information technology does take a little experience at making accurate cuts using a miter box. If this isn't something you have done before, you're probably amend off calling a end carpenter or cabinetmaker to do the piece of work.

remove interior trim prybar — Starting time insert a prybar behind the trim and pry the against a pocket-size wood cake.

If you are removing molding and trim as office of a remodel with the intention of reusing them, y'all may be able to save a few dollars past doing the work yourself.

If pigment is binding the molding to the wall, employ a utility pocketknife to score the paint forth the edges of the molding. And so apply a stiff putty knife to carve up the molding slightly from the wall and create a infinite for a pry bar. Slide the putty knife dorsum and forth until yous hit the finishing nails that hold the molding to the wall so follow these steps.

How to Remove Baseboard

1 Insert a pry bar at one set of nails and place a scrap of forest behind the bar to protect the wall. Pry gently outward to bow the molding away from the wall and loosen the nails. Movement to the adjacent set of nails and repeat the procedure until you've loosened the molding along its entire length.

wall_trim_removing_nails_ct100b — If a smash won't pry out, use a nailset to drive information technology deep into the trim, so pry away the trim.

2 Sometimes the nails won't loosen, and prying will cause the nails to pull through the molding. If the nails are stuck, use a nailset to bulldoze them about 3 quarters of the style through the molding's thickness. You need not become all the way through.

wall_trim_removal_ct100c — You can ease molding abroad from the wall by prying in ii locations.

3 Work with a pair of pry confined to remove the molding, leapfrogging the bars in turn to gradually ease the molding away from the wall without cracking or breaking it. With the molding off, use a hammer or pry bar to remove any nails that remain in the wall. Label each piece as you remove information technology so yous know where to supplant information technology later.

Removing Door and Window Trim

Door and window trim is often nailed with a pocket-sized nail at the mitered corners. If you pry at these points, the forest may split. First, use a mini-hacksaw to cut off the nails at the joint. If y'all do end up splitting trim when removing it, just mucilage it together and and so put a rubber ring around information technology or record it with masking tape until the gum dries.